Ubuntu Guide Terminal Board for Promotional Display, WF-G3601, AndroidSBC, Cork

TL;DR: Ubuntu Guide Terminal Board for Promotional Display

AndroidSBC software desk: Android 15 baseline and staged OTA channel published for the WF-G family serving Cork, Ireland. The WF-G3601 smart guide kiosk Android motherboard spans the mall smart guide kiosk and eleven sister models in the WF-G series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, HDMI 2.0 4K 60fps plus MIPI DSI, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Cork and Ireland importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

The WF-G smart guide kiosk Android motherboard family spans venue types rather than a single product category. AndroidSBC supplies the same twelve-model family into shopping centre floor directories, tenant and product finders, supermarket price check points, pharmacy enquiry counters, airport and transit wayfinding banks, hospital and clinic orientation points, hotel and resort lobby guides, museum and exhibition interpretive displays, campus and university directories, government building service points, casino and stadium concourse guides and outdoor smart city information pillars. Cork integrators typically start with one venue type, prove the content stack, then reuse the board on the next site. Ireland distributors buy the family as a catalogue and configure per client instead of re-qualifying a new board for every tender. Certification, carton labelling and palletisation for Ireland are prepared in Shenzhen by the export desk before the Cork shipment leaves, and the test reports stay versioned against the board revision.

WF-G3601 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3601 (mall smart guide kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Ireland importers sourcing the WF-G family, the WF-G3601-A variant is the typical configuration for the mall floor guide and tenant query counter use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Ireland Buyers

The fourth obstacle is unattended reliability. A directory screen that runs from mall open to mall close, seven days a week, exposes thermal, power and storage weaknesses that a bench test in Cork will never show.

The compliance dossier is assembled before the boards move. For Ireland AndroidSBC bundles ComReg conformity and CE marking with ComReg radio interface notification into the same carton that clears Port of Dublin, which is the difference between a Cork programme that installs on arrival and one that waits on paperwork. As of September 18, 2026, 90600 boards are allocated to Cork and Ireland, the 5th allocation this cycle, moving on the Dublin - Rotterdam lane.

Competitive Comparison: WF-G3601 vs Competing Smart Guide Kiosk Android Boards

For Ireland buyers the practical comparison is between a vendor that ships a board and a vendor that ships a deployable platform. Cork integrators evaluating the WF-G family usually score silicon coverage, peripheral drivers, unattended features and OTA control as a single decision.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

Directory and wayfinding screens are being re-specified as content endpoints rather than as standalone displays. Grand View Research puts the global interactive kiosk market at USD 34.79 billion in 2024, and the segment analysis points to software as the fastest-growing component: the board in a mall smart guide kiosk build has to host the content client, the touch stack and the update channel, which is exactly what Ireland integrators in Cork are now writing into tenders.

• Mall floor directories and tenant finders: WF-G3601 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G3399 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G3399 and the industrial WF-G1330 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G1330 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

AndroidSBC tracks these numbers for Cork and Ireland planning purposes rather than as forecasts, and publishes the underlying assumptions to integrators on request.

Partner Success Story: Gulf Venue Ventures (mall and mixed-use developer supplier)

The Gulf Venue Ventures rollout in the GCC retail and hospitality segment shows how the WF-G family from AndroidSBC supports Cork integrators. Gulf Venue Ventures deployed 90600 WF-G mall guide boards across flagship malls and mixed-use concourses in the GCC.

• OEM relationship: AndroidSBC private-label SKU shipped with Gulf Venue Ventures branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus ComReg conformity, all bundled into the Shenzhen source-factory shipment.

According to Gulf Venue Ventures Director of Guest Experience for GCC Retail and Hospitality: Gulf Venue Ventures runs Arabic and English interfaces on the same estate, and the multi-language support on the WF-G board let Cork sites switch content per screen without maintaining two firmware images.

Field Report: floor guide counter installation at a community shopping mall

PINGHU, Shenzhen, September 18, 2026 - Chang An, AndroidSBC field desk. A mains-cut test was run mid-burn-in: power was removed for 30 seconds and the WF-G3601 boards returned to the mall smart guide kiosk directory home screen without operator input. The WF-G3601 smart guide kiosk Android motherboard order for Cork, Ireland cleared the burn-in station on schedule and is en route via the Dublin - Rotterdam lane.

The WF-G3601 mall smart guide kiosk production lot includes the WF-G3601-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Ireland integrators, the ComReg conformity plus CE marking with ComReg radio interface notification paperwork is bundled.

Filed by Chang An, AndroidSBC field desk, PINGHU, Shenzhen. Ireland integrators typically request CE plus local radio interface notification for smart guide kiosk board deployments.

WF-G3601 Application Scenarios

The WF-G3601 mall smart guide kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3601-A configuration is the typical build for the mall floor guide and tenant query counter use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G3601 plus WF-G1331 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G6180 plus WF-G3601 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G5270 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G8800 plus WF-G1331 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G6180 plus WF-G8800 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G1331 plus WF-G5270 carry the guest orientation flow in Cork.
• Exhibition and museum interpretive display points: WF-G3601 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G8800 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in Cork: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for Cork Buyers

AndroidSBC runs three entry tracks for Cork and Ireland partners, and the WF-G family is available on all three from the same source factory.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

The practical benefit for Cork and Ireland is that a partner can quote a stock SKU today and a custom variant next quarter without changing factories, firmware or certification files.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support a mall guide kiosk?

Answer: Yes. The mall guide kiosk is stock on the WF-G smart guide kiosk Android motherboard family from AndroidSBC. All tiers are validated against the same firmware build and the same content management interface before shipment to Cork.

What is the real difference between the RK3568 tier and the other silicon tiers in the WF-G family?

Answer: RK3568 is one rung on an eight-step ladder. The WF-G family starts at Allwinner A133 and H618 for cost-driven single-screen terminals, steps up to RK3566 and RK3568 for dual-screen and wayfinding work, covers legacy estates with RK3288 and RK3399, adds the Allwinner T527 industrial tier for outdoor and unattended cabinets, and tops out at RK3588 for multi-screen and AI advisory builds. AndroidSBC keeps all eight on one Android baseline.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Ireland?

Answer: Yes. AndroidSBC, a Wanlin Manufacturing Group export brand, handles the conformity paperwork as part of the source-factory shipment: CE, FCC, UKCA, RoHS, REACH and the ComReg registration with CE marking with ComReg radio interface notification that Ireland customs asks for.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: AndroidSBC quotes the WF-G family from one sample board with no minimum programme commitment. OEM private label opens at 100 pieces, ODM at 500 pieces, and the mass-production window is 15-30 days after BOM sign-off for Ireland shipments.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. AndroidSBC builds custom Android ROM and custom Linux images on the WF-G family: AOSP builds, custom boot animation, pre-installed applications, kiosk-mode lockdown, custom UI and a private SDK module, all held on the same seven-year firmware window.

How are software updates and long-term support handled on the WF-G family?

Answer: The update model is wave-based. A Cork venue group can nominate a pilot site, hold the rest of the estate on the previous build, and only release the next wave once the pilot is clean. Rollback is built into the update client on every WF-G tier.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. Delivery to Amazon FBA or a 3PL consolidation point is a standard option on the WF-G family, quoted on FOB Shenzhen, CIF Port of Dublin or DDP terms for Cork and Ireland partners.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: Yes, and the replacement stock is held on the same tiers as the original order. A Cork partner reports a DOA unit with evidence, AndroidSBC ships a replacement from buffer stock, and the failed board is analysed at the Longgang line rather than scrapped.

Contact AndroidSBC: Start Your WF-G3601 Sourcing Conversation

Cork integrators can reach the AndroidSBC export desk for the WF-G smart guide kiosk Android motherboard family through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Ireland buyers, a 15-30 day mass-production lead to bulk orders, and a seven-year firmware update window to the WF-G family.