TL;DR: RK3288 POS Android Motherboard for Restaurant Till
AndroidSBC release: twelve-model WF-P POS motherboard family opens for volume orders serving Cork, Ireland. The WF-P3288 POS Android motherboard spans the legacy POS refresh with dual-screen output and eleven sister models in the WF-P series, all built on the RK3288 quad-core ARM Cortex-A17 1.8GHz SoC with the ARM Mali-T764 GPU, dual LVDS output at 1080p, and Android 10 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Cork and Ireland importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.
About AndroidSBC and the POS Android Motherboard Family
AndroidSBC builds POS boards for the way retailers actually buy: one pilot batch, then a frame agreement, then staggered releases against a call-off schedule. The WF-P family supports that pattern because the BOM is frozen per lot and the Cork partner can re-order the same configuration eighteen months later and receive the same board. Each production lot is burned in for 72 hours with the display, the touch panel and the printer loop running, and the serial number is logged against the test record so a Cork partner can trace a single board back to its run.
WF-P3288 Technical Specifications
| Parameter | AndroidSBC WF-P3288 (legacy POS refresh with dual-screen output) | Industry Average |
|---|---|---|
| Processor | RK3288 quad-core ARM Cortex-A17 1.8GHz SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 28nm | Older 28nm or 40nm process |
| GPU | Mali-T764 | Older Mali-450 or basic GPU |
| NPU / AI | none | No NPU on competing entry boards |
| Memory | 2GB DDR3 | DDR3 1GB / 2GB on competing boards |
| Storage | 16GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | dual LVDS output at 1080p | Single HDMI 1080p only on competing boards |
| Touch support | 5-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 10 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 5 plus Bluetooth 5.0 plus Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| POS peripherals | Thermal printer, receipt printer, barcode scanner, cash drawer, customer display | No bundled printer, scanner or drawer driver SDK on competing boards |
| Operating temperature | 0C to 50C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3288 (legacy POS refresh with dual-screen output) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Ireland importers sourcing the WF-P family, the WF-P3288-A variant is the typical configuration for the installed base refresh programme use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing POS Android Motherboards for Ireland Buyers
The second problem is the peripheral stack. A POS board is useless if the cash drawer does not fire, if the barcode scanner needs a driver nobody has, or if the customer display shows the cashier screen instead of the promotion loop.
Staged OTA is shipped as a tool, not a promise. A Cork chain can push an update to a pilot group of lanes first, hold the rest, and roll back the image if the pilot shows a printer regression, all from the same console. 23800 WF-P boards cleared final test on September 23, 2026 for Cork, booked on the Dublin - Rotterdam lane. The country compliance note for Ireland sat in the shipment folder alongside the peripheral validation report.
Competitive Comparison: WF-P3288 vs Competing POS Android Boards
What follows is not a spec-sheet comparison. It is the four questions a Cork chain asks after its first failed rollout.
- Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
- Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
- Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.
Global POS Terminal and Smart Checkout Market Trends
Unattended and self-service formats are the segment where the board specification bites hardest. A cabinet on a forecourt or in a store entrance has no staff to reset it, so the legacy POS refresh with dual-screen output has to hold a watchdog, an RTC and a clean auto-recovery path.
- Entry counter tier: WF-P3288 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
- Dual-screen mainstream tier: WF-P1330 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
- AI and unattended tier: WF-P6180 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.
For Cork partners the commercial conclusion is that the board vendor has to be a factory. A trading company cannot hold a BOM across a three-year refresh.
Partner Success Story: Gulf Counter Ventures (restaurant and hotel POS integrator)
The Gulf Counter Ventures case in the GCC hospitality segment is a working example of how the WF-P family from AndroidSBC supports Cork integrators. Gulf Counter Ventures installed 23800 WF-P boards across 52 restaurant and hotel counters.
- OEM relationship: AndroidSBC private-label SKU shipped with Gulf Counter Ventures branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus ComReg conformity, all bundled into the Shenzhen source-factory shipment.
Gulf Counter Ventures Programme Lead for GCC Hospitality noted: Gulf Counter Ventures runs Arabic and English receipt templates from the same WF-P board, and 23800 units were accepted into the Cork hospitality group after a two-week pilot.
Field Report: installed base refresh across a discount chain
LONGGANG, September 23, 2026 - Heng Yu, AndroidSBC field desk. On the Ireland configuration the WF-P3288 ran kiosk-mode lockdown with a single merchant app, and the watchdog recovered the lane after each simulated mains dip. The WF-P3288 POS Android motherboard order for Cork, Ireland cleared the burn-in station on schedule and is en route via the Dublin - Rotterdam lane.
The WF-P3288 legacy POS refresh with dual-screen output production lot includes the WF-P3288-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Ireland integrators, the ComReg conformity plus CE marking with ComReg radio interface notification paperwork is bundled.
Filed by Heng Yu, AndroidSBC field desk, LONGGANG. Ireland integrators typically request CE plus local radio interface notification for POS board deployments.
WF-P3288 Application Scenarios
The WF-P3288 legacy POS refresh with dual-screen output sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3288-A configuration is the typical build for the installed base refresh programme use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.
- Supermarket and hypermarket checkout: the WF-P3288 drives the cashier screen while the second lane carries the customer display or the promotion wall in Cork.
- Convenience and small format stores: the WF-P5270 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
- Restaurants and quick service: the WF-P7600 runs the order screen plus a kitchen display output, with the customer display showing the order total.
- Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
- Unattended retail and vending: the WF-P7601 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
- Fuel forecourts and parking: the WF-P7602 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
- Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
- AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
- Retrofit programmes in Cork: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.
Partnership Models for Cork Buyers
Because the WF-P family is built at the Longgang source factory, all three tracks below come with the same frozen BOM and the same seven-year firmware window.
- Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
- Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.
Entry to any of the three tracks starts with a sample batch and a peripheral validation run, and Ireland partners usually convert within one quarter.
Frequently Asked Questions
Does the WF-P POS Android motherboard family support a legacy POS refresh with dual-screen output?
Answer: It is. The WF-P family was specified around legacy POS refresh with dual-screen output, and every board in the family is validated on that use case before it leaves the Longgang factory.
Which silicon tiers are available in the WF-P family for Ireland buyers?
Answer: The WF-P family spans RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527. For Ireland buyers the choice is driven by counter throughput and by whether the lane needs an NPU.
Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?
Answer: Yes - that is the standard counter configuration. The printer runs on RS232 or USB, the scanner on USB, and the drawer fires from the RJ11 header, all validated together before the lot ships.
What is the minimum order quantity and the sample lead time for Ireland?
Answer: AndroidSBC takes single-board sample orders with a 1-3 day lead, then a 15-30 day mass-production lead on bulk orders. The MOQ for private-label work is agreed per SKU.
Is custom ROM, boot logo or pre-installed app development available?
Answer: AndroidSBC supports custom Android AOSP builds, Linux BSP porting, boot logo and animation work, pre-installed apps and custom UI, and locks the result as the production image.
How are firmware updates delivered to aan Ireland estate after deployment?
Answer: AndroidSBC ships staged OTA with rollback as a bundled tool, so aan Ireland estate of several hundred lanes can be updated in waves rather than all at once.
What shipping terms does AndroidSBC support for Ireland orders?
Answer: AndroidSBC supports FOB Shenzhen, CIF and EXW pricing, and books the shipping lane against a production slot so the Cork delivery date holds.
What happens if a board fails in the field in Ireland?
Answer: Each board carries a serial number logged against its burn-in record, so a field failure in Ireland is traced to its production lot, and the replacement ships from the same frozen BOM.
Contact AndroidSBC: Start Your WF-P3288 Sourcing Conversation
AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-P POS board family. Cork integrators can reach the export desk through:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
For Cork and Ireland the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.