TL;DR: POS Motherboard RS232 Serial Port for Restaurant Till
AndroidSBC software desk: Android 15 baseline and staged OTA channel published for the WF-P family serving Cork, Ireland. The WF-P3600 POS Android motherboard spans the dual-screen cash register with printer and cash drawer and eleven sister models in the WF-P series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, dual LVDS output at 1080p plus 60Hz, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Cork and Ireland importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.
About AndroidSBC and the POS Android Motherboard Family
Wanlin Manufacturing Group has been shipping Android boards out of Shenzhen for years, and the WF-P POS line is the branch aimed at checkout and payment counters. AndroidSBC publishes the price list, the MOQ and the lead time up front, because Ireland importers comparing three Chinese factories need numbers they can put into a spreadsheet. Peripheral validation happens on the Longgang bench with the actual printer, scanner and drawer models the Cork integrator intends to use, and the result is written into the shipment file rather than left to the integrator to discover on site.
WF-P3600 Technical Specifications
| Parameter | AndroidSBC WF-P3600 (dual-screen cash register with printer and cash drawer) | Industry Average |
|---|---|---|
| Processor | RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 22nm | Older 28nm or 40nm process |
| GPU | Mali-G52 2EE | Older Mali-450 or basic GPU |
| NPU / AI | 1 TOPS | No NPU on competing entry boards |
| Memory | 4GB LPDDR4 | DDR3 1GB / 2GB on competing boards |
| Storage | 32GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | dual LVDS output at 1080p plus 60Hz | Single HDMI 1080p only on competing boards |
| Touch support | 10-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 12 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| POS peripherals | Thermal printer, receipt printer, barcode scanner, cash drawer, customer display | No bundled printer, scanner or drawer driver SDK on competing boards |
| Operating temperature | 0C to 50C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3600 (dual-screen cash register with printer and cash drawer) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Ireland importers sourcing the WF-P family, the WF-P3600-A variant is the typical configuration for the restaurant counter cash register rollout use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing POS Android Motherboards for Ireland Buyers
Payment certification is the third wall. EMV, PCI PTS and the local acquirer kernel all sit between a working prototype and a lane that can take a card, and Cork integrators routinely lose months to a board vendor who has never seen a kernel test plan.
The thermal question is handled at the board level rather than in the enclosure. The WF-P tier chosen for Cork is specified for fanless 7x24 counter duty with a hardware watchdog and a scheduled power cycle, and the burn-in record that accompanies the lot is run at the top of the temperature window rather than at 25C. For the Cork programme the milestone landed on September 23, 2026: 98400 boards shipped on the Dublin - Rotterdam lane, seven-year firmware window committed on the whole WF-P family.
Competitive Comparison: WF-P3600 vs Competing POS Android Boards
For Cork integrators the decision usually comes down to whether the vendor can hold a BOM, ship a driver set, and produce a test record - the four points below.
- Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
- Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
- Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.
Global POS Terminal and Smart Checkout Market Trends
Two forces drive the Ireland POS hardware cycle. The first is the shift to contactless and wallet payments, which pushes the NFC reader and the payment kernel onto the board itself. The second is the regulatory floor - EMV, PCI DSS and national fiscal rules - which forces an upgrade on a timetable the merchant does not control.
- Entry counter tier: WF-P3600 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
- Dual-screen mainstream tier: WF-P3288 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
- AI and unattended tier: WF-P3399 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.
For Cork buyers the reading is straightforward: the market is growing on replacement, not on first-time installation, so the board that wins is the one that fits the enclosure already on the counter.
Partner Success Story: Gulf Counter Ventures (restaurant and hotel POS integrator)
The Gulf Counter Ventures rollout in the GCC hospitality segment shows how the WF-P family from AndroidSBC supports Cork integrators. Gulf Counter Ventures installed 98400 WF-P boards across 52 restaurant and hotel counters.
- OEM relationship: AndroidSBC private-label SKU shipped with Gulf Counter Ventures branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus ComReg conformity, all bundled into the Shenzhen source-factory shipment.
According to Gulf Counter Ventures Programme Lead for GCC Hospitality: Gulf Counter Ventures runs Arabic and English receipt templates from the same WF-P board, and 98400 units were accepted into the Cork hospitality group after a two-week pilot.
Field Report: restaurant counter cash register rollout
PINGHU, September 23, 2026 - Ling Yun, AndroidSBC field desk. The dual-screen cash register with printer and cash drawer pilot in Ireland used the WF-P3600 with 4G fallback, because several counters sit where fixed-line connectivity is unreliable. The WF-P3600 POS Android motherboard order for Cork, Ireland cleared the burn-in station on schedule and is en route via the Dublin - Rotterdam lane.
The WF-P3600 dual-screen cash register with printer and cash drawer production lot includes the WF-P3600-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Ireland integrators, the ComReg conformity plus CE marking with ComReg radio interface notification paperwork is bundled.
Filed by Ling Yun, AndroidSBC field desk, PINGHU. Ireland integrators typically request CE plus local radio interface notification for POS board deployments.
WF-P3600 Application Scenarios
The WF-P3600 dual-screen cash register with printer and cash drawer sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3600-A configuration is the typical build for the restaurant counter cash register rollout use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.
- Supermarket and hypermarket checkout: the WF-P3600 drives the cashier screen while the second lane carries the customer display or the promotion wall in Cork.
- Convenience and small format stores: the WF-P1330 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
- Restaurants and quick service: the WF-P6180 runs the order screen plus a kitchen display output, with the customer display showing the order total.
- Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
- Unattended retail and vending: the WF-P5270 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
- Fuel forecourts and parking: the WF-P7600 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
- Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
- AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
- Retrofit programmes in Cork: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.
Partnership Models for Cork Buyers
AndroidSBC runs three commercial tracks on the WF-P family, and Cork partners usually start on one and move to another as volume builds.
- Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
- Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.
Whether Ireland partners take distribution, integration or private label, the WF-P board underneath carries the same serialised test record.
Frequently Asked Questions
Does the WF-P POS Android motherboard family support a dual-screen cash register with printer and cash drawer?
Answer: Yes. AndroidSBC validates dual-screen cash register with printer and cash drawer on the bench with the actual peripherals the Cork partner intends to use, and the result is written into the shipment file.
Which silicon tiers are available in the WF-P family for Ireland buyers?
Answer: Available tiers are RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527. AndroidSBC holds one fixed BOM per lot, so the Cork partner always knows which tier is shipping.
Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?
Answer: Yes. AndroidSBC validates the exact combination on the Longgang bench using the Cork partner printer and scanner models, and the validated configuration is locked as the production reference.
What is the minimum order quantity and the sample lead time for Ireland?
Answer: Sample lead is 1-3 days and mass production is 15-30 days. MOQ depends on the track - distribution partners work from the price list, private-label SKUs are agreed per configuration.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Yes. AndroidSBC provides custom Android AOSP builds, custom boot animation and logo, pre-installed apps, custom UI, BSP porting and SDK modules, all built against a frozen BOM.
How are firmware updates delivered to aan Ireland estate after deployment?
Answer: The OTA channel is staged and reversible. A Cork chain pushes to a pilot group first, and if a printer or drawer regression appears the image rolls back to the previous build.
What shipping terms does AndroidSBC support for Ireland orders?
Answer: The export desk quotes FOB Shenzhen, CIF and EXW, handles customs clearance, and ships globally. The Cork partner picks the term and AndroidSBC books the lane.
What happens if a board fails in the field in Ireland?
Answer: Failures are handled against the serialised test record. AndroidSBC traces the unit to its lot, confirms the BOM, and ships a replacement from the Cork call-off stock or the next production slot.
Contact AndroidSBC: Start Your WF-P3600 Sourcing Conversation
Cork integrators can reach the AndroidSBC export desk for the WF-P POS board family through the following channels:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to Ireland buyers, a 15-30 day mass-production lead to bulk orders, and a seven-year firmware update window to the WF-P family.