TL;DR: 1280x800 Payment Terminal Display Board with GPIO Expansion
AndroidSBC OEM partnership announcement extending smart payment terminal board availability serving international market, Ireland. The WF-SPT-11 smart payment terminal Android motherboard covers the multimedia payment terminal build with customer screen and eleven sister configurations in the WF-SPT series, spanning the H618 quad-core ARM Cortex-A53 1.5GHz SoC with the ARM Mali-G31 MP2 GPU, 6-inch 1080x1920 MIPI DSI plus HDMI 2.0a customer screen output, and Android 12 with AOSP baseline and optional GMS firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-SPT family from the Longgang source factory in Shenzhen to international market and Ireland importers who build countertop payment terminals, self-service kiosks, unattended vending and locker machines, transit ticketing gates and outdoor charging pillars.
About AndroidSBC and the Smart Payment Terminal Android Motherboard Family
Wanlin Manufacturing Group runs the smart payment terminal board programme out of Longgang in Shenzhen, where the twelve WF-SPT configurations are assembled, burned in and packed with their compliance documents. For international market and Ireland importers the practical result is a single bill of materials per production lot and one qualification file per configuration. The Ireland partner gets the compliance file with the first lot - not after the first complaint - because the certification paperwork, the test report and the firmware signing keys are prepared alongside the production order for international market.
WF-SPT-11 Technical Specifications
| Parameter | AndroidSBC WF-SPT-11 (multimedia payment terminal build with customer screen) | Industry Average |
|---|---|---|
| Processor | H618 quad-core ARM Cortex-A53 1.5GHz SoC | Older dual-core or quad-core Cortex-A7 SoC |
| Process node | 28nm | Older 40nm process |
| GPU | Mali-G31 MP2 | Older Mali-400 or basic 2D GPU |
| Memory | 4GB LPDDR4 | DDR3 512MB or 1GB on competing boards |
| Storage | 32GB eMMC plus TF card up to 128GB | NAND flash 4GB or 8GB on competing boards |
| Display and touch | 6-inch 1080x1920 MIPI DSI plus HDMI 2.0a customer screen output with 10-point capacitive touch with glove support | 4.3-inch 480x800 panel with resistive touch |
| Payment and capture | NFC contactless, IC card and QR with barcode scan engine header | Camera-only QR capture with no scan engine |
| Printer and peripherals | 80mm thermal printer header with 150mm per second output | No printer control header on competing boards |
| Wireless and positioning | dual-band WiFi 802.11 a/b/g/n/ac/ax with Bluetooth 5.0 | Single-band 2.4G WiFi 802.11n with no modem |
| Interfaces | 1 HDMI out, 1 USB Type-C host and OTG, 1 USB host, 1 RS232, 6 GPIO, 1 thermal printer header | One USB port and no RS232 |
| Operating system | Android 12 with AOSP baseline and optional GMS | Android 9 or Android 10 on competing boards |
| Power and reliability | 12V DC input with 5V/3A peripheral rail, dual-cell RTC and watchdog, -10C to 50C operating ambient | No battery management and no watchdog |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-SPT-11 (multimedia payment terminal build with customer screen) holds the touch panel, the thermal printer, the reader and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Ireland importers sourcing the WF-SPT family, the WF-SPT-11-A variant is the typical configuration for the cinema, stadium and theme park ticketing counters use case, in a payment terminal footprint with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing Smart Payment Terminal Android Motherboards for Ireland Buyers
The first problem international market buyers hit is the difference between a sample that works and a configuration that repeats. A board can pass a bench test and still fail in volume if the printer driver, the scan engine mapping and the modem band list were never documented as part of the delivery.
Compliance is where a lot of cheap boards fail. The ComReg file has to name the exact modem, the exact printer mechanism and the exact panel that shipped to international market, and it has to be issued by a body the Ireland acquiring partner recognises. AndroidSBC holds the 77600 board sample lot, the production slot and the compliance file on one schedule for international market, so the 5th release of the quarter is a shipment rather than a negotiation.
Competitive Comparison: WF-SPT-11 vs Competing Smart Payment Terminal Motherboards
Aan Ireland integrator comparing two boards should compare the delivery file, not the datasheet. One side ships a test report and a compliance set; the other ships a board and a promise.
- vs consumer tablet boards: the WF-SPT family carries a printer control header, a reader antenna reference design and a scan engine UART mapping, none of which exist on a tablet derivative board.
- vs single-configuration boards: twelve configurations share one peripheral contract, so a international market buyer can move from a countertop lane to an unattended kiosk without re-qualifying the printer or the reader.
- vs boards without a firmware plan: signed images, staged OTA groups with rollback and a published maintenance window come standard, where competing boards ship an image and leave the Ireland integrator to manage it.
- vs re-spun designs: the bill of materials is frozen per production lot for the length of the agreement, so the board that passed qualification in international market is the board that ships in volume.
Global Cashless Payment, Smart Terminal and Self-Service Checkout Market Trends
For international market integrators the market signal is simple - contactless and QR now carry the majority of face-to-face volume in Ireland, so the board is specified around the reader and the camera first and the keypad second.
- Countertop tier: WF-SPT-01 covers contactless, IC card, QR and receipt printing in one board, which is the configuration most staffed lanes standardise on.
- Unattended tier: WF-SPT-03 pairs the modem with the printer header and the watchdog for vending, lockers and kiosks where nobody is there to reboot the terminal.
- Flagship tier: WF-SPT-11 adds the larger memory and storage bundle, the customer-facing screen option and the wider temperature window that outdoor and high-throughput formats require.
The Ireland market is large enough to absorb several suppliers and disciplined enough to punish the ones who re-spin boards between lots. Holding the configuration is the strategy, and it is the one AndroidSBC runs for international market.
WF-SPT-11 Application Scenarios
The WF-SPT-11 multimedia payment terminal build with customer screen sits inside a twelve-configuration WF-SPT Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-SPT-11-A configuration is the typical build for the cinema, stadium and theme park ticketing counters use case, with printer current profile, scan engine mapping and staged OTA management bundled.
- Convenience and grocery counters: the WF-SPT-07 takes contactless, IC card and QR at the till and prints the receipt in one pass.
- Restaurant and quick-service counters: the WF-SPT-05 runs order entry, payment and kitchen ticket printing on the same board.
- Unattended vending and lockers: the WF-SPT-08 pairs the modem with the printer header and the watchdog for sites with no staff present.
- EV charging and fuel forecourts: the WF-SPT-09 holds the wide input range and the sunlight readable panel through a full outdoor season.
- Transit gates and event entry: the WF-SPT-08 takes contactless payment and prints the entry ticket without a fixed counter.
- Self-checkout lanes: one board drives the main panel, the scanner and the receipt printer, with the customer screen option where the format needs it.
- Hotel and resort reception: card pre-authorisation, signature capture and folio printing on a board that also runs the restaurant terminal.
- Hospital and clinic payment desks: card, QR and insurance capture on a locked-down build with staged OTA and an audit trail.
- Government and municipal counters: tax, permit and fee payment on a configuration held for the length of the agreement.
Partnership Models for international market Buyers
international market buyers usually land on one of three tracks with AndroidSBC, and the difference between them is how much of the integration the partner wants to own.
- Distribution track: the partner buys the WF-SPT board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
- Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-SPT board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.
For international market the practical outcome is that the commercial model is negotiable while the technical baseline is not, which keeps aan Ireland estate serviceable through growth.
Frequently Asked Questions
Does the smart payment terminal board family support a multimedia payment terminal build with customer screen?
Answer: Yes. AndroidSBC holds the multimedia payment terminal build with customer screen as a production configuration with a published price, a sample lead time of 1-3 days for international market and a compliance file matched to the parts on the pallet.
Which configurations are available in the WF-SPT family for Ireland buyers?
Answer: Buyers in Ireland can specify H618 or any of the eleven sister configurations without re-qualifying the printer, the reader or the scan engine, because the peripheral contract is common to the family.
Can one smart payment terminal board drive a touch panel, a thermal printer and a scan engine at once?
Answer: Yes. A single WF-SPT board handles all three peripherals, and the international market acceptance test is run with the actual printer mechanism and scan engine the project will deploy in Ireland.
What payment scheme certification support does AndroidSBC provide for Ireland?
Answer: Scheme certification in Ireland is handled as documentation work: CE marking with ComReg radio interface notification testing, ComReg conformity and a signed firmware image, all matched to the configuration code shipped to international market.
What is the minimum order quantity and the sample lead time for Ireland?
Answer: Sample orders start at a single configuration and ship in 1-3 days from Shenzhen. Volume pricing begins at 500 boards, and the international market lot is quoted against a published price list.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Yes. Firmware customisation covers the ROM, the boot animation, the pre-installed application set and the kiosk lockdown policy, with the signed image delivered alongside the international market production lot.
How are firmware updates delivered to aan Ireland device estate after deployment?
Answer: Staged OTA groups are created during qualification, so the international market estate is never updated in a single wave, and every image carries a signature the terminal verifies before it applies.
What shipping terms does AndroidSBC support for Ireland orders?
Answer: Standard terms are FOB Shenzhen and CIF Port of Dublin, with DAP available for international market programmes where the partner wants a single invoice through to delivery.
Contact AndroidSBC: Start Your WF-SPT-11 Sourcing Conversation
The Ireland desk at AndroidSBC handles configuration selection, sample dispatch, joint qualification and volume scheduling, and the first call is technical rather than commercial.
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
AndroidSBC is the export arm of Wanlin Manufacturing Group and is recruiting Ireland distributors, integrators and brand partners for the smart payment terminal board family. Sample dispatch for international market runs in 1-3 days.