RK3588 Custom NPU Development, WF-C3588-K4, AndroidSBC, Cork

TL;DR: RK3588 Custom NPU Development

LONGGANG, Shenzhen, September 12, 2026 - Wanlin Manufacturing Group confirmed the release of lot 228, a 37,190-unit run of WF-C3588-K4 boards destined for Cork, Ireland, after the lot cleared the burn-in rack and the pre-shipment bench.

AndroidSBC announces OEM, ODM and private-label capacity on Rockchip RK3588 custom boards serving Cork, Ireland. One Rockchip RK3588 silicon, nine custom motherboard variants. The WF-C3588 programme covers custom Android boards, industrial control, core board and SOM work, signage, kiosk and POS, robotics, NVR, edge AI and ARM PC lines, all on the same octa-core 8nm platform with 6 TOPS NPU. Every board leaves the Wanlin Longgang plant with a per-lot certification pack and a burn-in record traceable by unit barcode. Buyers in Cork and Ireland can mix custom variants inside a single framework agreement.

About AndroidSBC and the Rockchip RK3588 Board Family

AndroidSBC is the export brand of Wanlin Manufacturing Group. The group runs SMT, test and packing under one roof at Longgang in Shenzhen, and it has built custom boards on Rockchip silicon for overseas OEM customers for over ten years. The WF-C3588 line-up covers nine custom categories on the same Rockchip RK3588 octa-core 8nm silicon with 6 TOPS NPU: custom Android motherboards, custom industrial boards, core board and SOM carrier design, custom signage and video wall boards, custom kiosk and POS boards, custom robotics controllers, custom NVR boards, custom edge AI boards, and custom ARM PC and NAS boards. Buyers in Cork and Ireland can source any of the nine custom variants from one factory with one set of export documents.

WF-C3588-K4 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-C3588-K4 (Custom Kiosk and POS Terminal Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For Ireland importers sourcing the WF-Series, the 8GB + 64GB (WF-C3588-K4-B) variant is the typical configuration for the custom self-service and POS programmes use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Custom Kiosk and POS Terminal Board for Ireland Buyers

Importers in Cork usually discover the same thing about the custom kiosk and pos terminal board category: the quote is easy and the repeat shipment is not. The Rockchip RK3588 part depends on a specific wafer allocation, and the second and third orders are where a supply chain either holds or quietly slips a quarter. Software continuity is the second trap. A bare Android image boots fine on the bench, so the problem tends to appear only after the Cork customer has taken delivery and the first OTA push fails against the DRM credentials.

The third item is the certification file. A marking without a dated test report is a placeholder, and placeholder paperwork is what turns a routine Ireland clearance into a three-week hold. The answer AndroidSBC applies is to close the gap at the source. Custom variant assembled on the Longgang line, certified image burned, burn-in record traceable per unit, certification file issued with the lot. The nine WF-C3588 variants span self-service kiosks, ordering terminals, checkout systems, vending machines, parcel lockers, smart lockers, unattended retail, and POS registers and each carries three memory configurations, which keeps most Ireland requirements on a standard custom SKU rather than a from-scratch run.

For Ireland specifically, the file travels with the goods. In Ireland the market is served by Dublin-based distributors who often also cover Northern Ireland, so one listing can reach two regulatory regimes. AndroidSBC prepares the CE marking with ComReg radio interface notification documentation for ComReg, attaches the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), and consigns the lot to Port of Dublin on the Dublin to Rotterdam relay.

Competitive Comparison: WF-C3588-K4 vs Competing RK3588 Boards

Three families of board chase the same custom kiosk and pos terminal board socket. The first is catalogue hardware with fixed memory and fixed I/O, the second is re-badged stock where nobody owns the schematic, and the third is a real custom platform built by the factory that runs the SMT line. The WF-C3588-K4 belongs to the third family and separates itself on Rockchip RK3588, on customization depth from schematic to firmware, and on a certified image burned per lot.

• vs standard SBCs in kiosks: the WF-C3588-K4 arrives with the serial bank, the payment profile and the kiosk ROM already in place, so the integrator does not build a stack from parts.
• vs POS chipset vendors: the 6 TOPS NPU adds vision features on the same board that runs the till, without a second compute module.
• vs turnkey terminal importers: the board-level customization path lets a kiosk brand change the I/O and the firmware without changing the terminal factory.
• vs unbranded boards: per-unit barcodes and burn-in records give the estate a real RMA trail instead of a swap-and-hope process.

Global Custom Kiosk and POS Board Market Trends

Buyers in Cork are reading the Custom Kiosk and POS Board curve before they commit to a custom kiosk and pos terminal board programme. MarketsandMarkets reports the Edge AI hardware segment at USD 26.9 billion in 2025 with a 32.7 percent CAGR to USD 108.2 billion by 2030 (MarketsandMarkets, 2025-2030), used here as the RK3588-class silicon baseline rather than as a number for this category. That baseline breaks into three practical demand patterns for the WF-C3588 in Ireland:

• Self-service ordering kiosk: a QSR estate runs ordering terminals with a locked launcher and nightly OTA updates.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-C3588-K4 board carries that headroom without a board change.
• Smart vending machine: an operator adds shelf-camera stock checks with the NPU and cuts route visits by a third.

Channel research on the Custom Kiosk and POS Board segment keeps landing on the same point: the constraint is allocation, and allocation is held by factories rather than traders.

The common thread in Ireland is that single orders are being replaced by blanket agreements with a monthly release, because a custom board programme that has to survive a twelve-month window cannot absorb an allocation gap in the middle of it.

Partner Success Story: Ferrovia Transit Tech in Cork, Ireland

Ferrovia Transit Tech, a rail HMI contractor serving the Ireland market, deployed 5,200 custom WF-C3588-I1 industrial boards for platform HMI and gate control. The rollout covered the self-service ordering kiosk, smart vending machine, and age-gate terminal workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 5,200 custom WF-C3588-I1 industrial boards for platform HMI and gate control
• Region: Cork, Ireland
• Models used: WF-C3588-K4 (lead SKU), plus eight sibling custom RK3588 board variants in the same platform family
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, IEC 62368-1, EN 55032, EN 55035, plus optional UL 60950-1, GMS, Widevine L1 and Dolby Audio per variant
• Logistics: FOB Yantian with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Dublin via the Dublin to Rotterdam relay

"Rail cabinets have no air conditioning and no patience. AndroidSBC routed the CAN and multi-serial lines we asked for, ported the Yocto BSP to our carrier, and the wide-temperature variants have now held through two summers."

- James Whitfield, Programme Manager

Field Report: a school district rollout in Cork, where 37,190 units of the WF-C3588-K4 board are being installed in classroom device carts

Reporter Zhou Tao, on the ground in Cork, Ireland. The district took delivery of the order and dispatched installation crews to eight sites. Each WF-C3588-K4 unit was sealed into a ruggedised chassis running a managed Android image with the education services stack pre-provisioned for the district tenant, and the fleet enrolled against the MDM the same week.

The QA lead noted that the WF-C3588-K4 lot was the third consecutive run to clear the aging bench without a retest.

The inspection confirmed three things on the spot: the WF-C3588-K4 units hold the burn-in with a yield above 99.42 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering CE marking with ComReg radio interface notification administered by ComReg, cleared for entry at Port of Dublin on the Dublin to Rotterdam relay. Wanlin remains one of the few source factories currently shipping a nine-variant custom RK3588 motherboard line with a per-lot paper trail that Ireland importers can hand straight to their customs broker.

Filed by Zhou Tao, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-C3588-K4 Application Scenarios

The WF-C3588 line fits nine custom motherboard lanes, with the WF-C3588-K4 (Custom Kiosk and POS Terminal Board) as the lead SKU for Cork and Ireland programmes:

• Self-service ordering kiosk: a QSR estate runs ordering terminals with a locked launcher and nightly OTA updates.
• Checkout and POS register: a retail chain drives the register, the scanner bank and the payment terminal from one board.
• Smart vending machine: an operator adds shelf-camera stock checks with the NPU and cuts route visits by a third.
• Parcel locker bank: a locker network runs door control and a camera per bay on the multi-serial I/O profile.
• Ticketing kiosk: a transit operator prints tickets and reads QR passes on an offline-capable terminal.
• Age-gate terminal: a licensed venue runs on-device face age estimation with no cloud round trip.
• Unattended retail store: a smart store runs entry gates, shelf cameras and checkout analytics on one board class.
• Queue analytics display: a bank branch counts queues locally and posts wait times to the lobby screen.

Partnership Models for Cork Buyers

The WF-C3588 custom line is available to Ireland partners through three routes, and they can be mixed inside one agreement:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

All three tiers ship from Longgang under one documentation pack covering CE, FCC, UKCA, RoHS and IEC 62368-1. A Cork first order on the WF-C3588-K4 is normally the 8GB + 64GB (WF-C3588-K4-B) configuration at MOQ 5,000 units per shipment, standard samples in 1-3 days and 15-30 days to production.

Frequently Asked Questions

What exactly can be customised on an RK3588 motherboard from AndroidSBC?

Answer: Everything from the copper up. Custom PCB and PCBA, custom I/O routing, custom memory and storage configuration, custom display and camera interfaces, custom thermal profile from commercial to -40C to 85C industrial, and custom branding including silk-printed logo, packaging, SKU label and boot animation. The firmware side covers custom Android (GMS or AOSP), Ubuntu, Debian, Yocto and OpenHarmony builds with BSP ports handled by the Longgang engineering desk rather than handed to the buyer as an unmodified vendor drop.

Can AndroidSBC port a custom Android ROM or a custom Linux BSP to our carrier board?

Answer: Yes, and that work stays in-house. The ODM tier covers custom Android ROM builds with proprietary services and launchers, AOSP builds without Google services, and Linux images on Ubuntu, Debian, Yocto or Buildroot. BSP ports for custom carrier boards are executed by the Longgang engineering desk, with SDK and BSP source released to the partner under NDA. The same desk handles driver development for the I/O you added, which is the part that usually stalls when a factory forwards a vendor drop and walks away.

Can the 6 TOPS NPU on a custom board run our own AI models?

Answer: Yes. Custom NPU development covers RKNN model deployment, quantization from the major frameworks, multi-model pipelines on the triple-core NPU, and custom AI algorithm integration. The desk validates throughput on your exact memory configuration, and the deployment lands as a versioned RKNN file that OTA can update in the field, which is how Ireland partners iterate models without replacing hardware.

What are the MOQ and lead times for a custom RK3588 motherboard?

Answer: Samples of standard variants leave the factory in 1-3 days. Custom builds run 15-30 days to mass production once the design is signed off, with the schematic review and carrier design handled in the same window. MOQ sits at 5,000 units per shipment on standard configurations, custom runs are quoted against volume, and small pilot batches are accepted for first-article programmes.

What certifications does a custom board need for Ireland, and who handles them?

Answer: Certification is part of the customization scope, not an afterthought. The in-house file covers CE, FCC Part 15, UKCA, RoHS 2.0, REACH and IEC 62368-1 with test reports dated inside twelve months, plus GMS and EDLA tracks for custom Android and display products. The file is built for the exact configuration you ship, which matters for a custom board because a test report on a different memory fit is not a valid report at all.

How long will AndroidSBC keep supplying a custom board?

Answer: Seven years minimum, written into the framework agreement. The RK3588 platform carries a long industrial lifecycle, and Wanlin commits to the supply window, to security patches across the Android, Ubuntu LTS, Debian LTS and Yocto tracks, and to OTA update infrastructure for field-deployed units. For a custom board that is the whole point of going to a source factory: the product lifecycle is a contract term, not a hope.

Can AndroidSBC ship custom boards to Amazon FBA warehouses or 3PL consolidation points?

Answer: That is routine. AndroidSBC delivers DDP into Amazon FBA in the US, EU and Japan and into 3PL consolidation points at Hong Kong, Singapore, Rotterdam, Los Angeles and Shenzhen. Carton and pallet configuration follows FBA inbound rules, and the place of origin on the declaration is the Wanlin Longgang source factory.

How does AndroidSBC handle RMA or DOA replacements on custom boards?

Answer: The DOA target is 0.3 percent over twelve months. For RMA, partners send the WF-C3588-K4 unit back to Longgang with the burn-in barcode attached, and replacements go out within ten business days. The per-unit record means the failure report usually carries a root cause alongside the replacement, which is what a Ireland integrator running a custom configuration actually needs.

Contact AndroidSBC: Start Your WF-C3588-K4 Sourcing Conversation

Wanlin Manufacturing Group sells the WF-C3588 custom motherboard line overseas through AndroidSBC. Cork and Ireland importers, brand owners and channel distributors who want to source the custom kiosk and pos terminal board direct from the Longgang plant can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: CE marking with ComReg radio interface notification for Ireland, administered by ComReg, entering at Port of Dublin on the Dublin to Rotterdam relay
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

To speed up a custom board review, include the target volume, the I/O and firmware changes you need, and your preferred Incoterm. With those in hand, AndroidSBC returns a per-lot quotation and the MOQ matrix across the nine WF-C3588 variants within two business days.