RK3588 Custom Locker Control Board, WF-C3588-A0, AndroidSBC, Cork

TL;DR: RK3588 Custom Locker Control Board

LONGGANG, Shenzhen, September 12, 2026 - The Rockchip RK3588 line at Wanlin Longgang closed lot 395 this week: 28,925 WF-C3588-A0 boards bound for Cork, Ireland, each unit traceable to its own burn-in barcode.

AndroidSBC export paperwork update on the nine-variant WF-C3588 custom board line serving Cork, Ireland. The WF-C3588 line is a custom motherboard programme built on the Rockchip RK3588 octa-core platform (4x Cortex-A76 at 2.4GHz plus 4x Cortex-A55 at 1.8GHz on 8nm) with a triple-core NPU delivering 6 TOPS of INT8 inference, 8K H.265 decode and up to 32GB of LPDDR4X or LPDDR5. AndroidSBC, the export arm of Wanlin Manufacturing Group, builds nine custom variants at the Longgang source factory in Shenzhen for Cork and Ireland buyers: WF-C3588-A0 custom Android motherboards, WF-C3588-I1 custom industrial boards, WF-C3588-M2 core boards and SOMs with carrier design, WF-C3588-S3 custom signage and video wall boards, WF-C3588-K4 custom kiosk and POS boards, WF-C3588-R5 custom robotics controllers, WF-C3588-N6 custom NVR boards, WF-C3588-E7 custom edge AI boards, and WF-C3588-P8 custom ARM PC and NAS boards.

About AndroidSBC and the Rockchip RK3588 Board Family

The WF-C3588 is a nine-variant custom motherboard programme from AndroidSBC, the export arm of Wanlin Manufacturing Group in Shenzhen. One Rockchip RK3588 silicon, nine custom categories: custom Android motherboards, custom industrial boards, core board and SOM work, custom signage and video wall boards, custom kiosk and POS boards, custom robotics controllers, custom NVR boards, custom edge AI boards, and custom ARM PC and NAS boards. Wanlin's Longgang plant handles SMT, burn-in and pre-shipment inspection in one building, and the export desk handles the CE, FCC, UKCA, RoHS and IEC 62368-1 file per lot. For Ireland importers, the line covers the custom board categories a Cork distributor is most often asked to quote.

WF-C3588-A0 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-C3588-A0 (Custom Android Motherboard for OEM and ODM Projects) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For Ireland importers sourcing the WF-Series, the 8GB + 64GB (WF-C3588-A0-B) variant is the typical configuration for the custom Android motherboard programmes use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Custom Android Motherboard for OEM and ODM Projects for Ireland Buyers

Buyers in Cork who have run the custom android motherboard for oem and odm projects category for a few years tend to stop shopping on price alone. The Rockchip RK3588 allocation is the real constraint, and it is the reason a 28,925-unit order can look cheap on paper and expensive in a slipped quarter. Then comes the firmware question. The hardware spec is straightforward to verify; whether the board holds a credential-locked stack through a 72-hour loop and a field OTA is a different test, and it is normally the Cork buyer's warehouse that discovers the answer.

Documentation closes the list. Buyers in Cork have learned to ask for the test reports before the deposit, because a CE mark printed on a carton is worth nothing at the port without the Declaration of Conformity behind it. AndroidSBC moves all three risks inside the factory: the custom variant is assembled at Longgang, the certified image is burned on the same line, and the Technical File ships with the lot. Across the nine WF-C3588 variants the coverage runs from custom Android motherboards, GMS-certified smart displays, commercial tablets, smart mirrors, OTT boxes, conference panels, smart home hubs, in-vehicle displays, and white-label Android terminals, with three memory configurations per variant, so a Cork buyer can usually match a requirement from the standard custom range.

The Ireland paperwork question is settled before production. In Ireland the market is served by Dublin-based distributors who often also cover Northern Ireland, so one listing can reach two regulatory regimes. The Longgang export desk prepares the destination-market file covering CE marking with ComReg radio interface notification administered by ComReg and releases it with the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), booking the lot into Port of Dublin on the Dublin to Rotterdam relay.

Competitive Comparison: WF-C3588-A0 vs Competing RK3588 Boards

The comparison set for the custom android motherboard for oem and odm projects socket breaks three ways: catalogue boards with fixed I/O and no engineering support, re-badged imports with a sticker but no schematic, and source-factory custom boards that carry the BSP, the test bench and the certification desk in-house. The WF-C3588-A0 is in the last group, and the separation comes from Rockchip RK3588, from customization depth, and from the per-lot certified image burn.

• vs off-the-shelf Android boards: the WF-C3588-A0 starts from a reference design and takes custom memory, storage, display and firmware lines without an NRE penalty on standard variants.
• vs re-badge resellers: AndroidSBC controls the PCB, the PCBA line and the BSP, so a custom I/O change is a factory engineering change rather than a request passed to a third party.
• vs generic AOSP vendors: the GMS, EDLA and CTS track is pre-walked on RK3588 at the Longgang plant, which removes the certification loop that stalls most custom Android launches.
• vs short-line brokers: the seven-year supply commitment on the RK3588 platform is written into the framework agreement, not left as a verbal assurance.

Global Custom Android Motherboard and Smart Display Market Trends

Order timing in Ireland now follows the Custom Android Motherboard and Smart Display curve rather than the old annual budget cycle. MarketsandMarkets sizes the Edge AI hardware segment at USD 26.9 billion for 2025 with a 32.7 percent CAGR to USD 108.2 billion by 2030 (MarketsandMarkets, 2025-2030), and that growth is the reference point Ireland buyers use when they argue about RK3588 allocation. In Cork, it shows up as three distinct demand patterns across the WF-C3588:

• GMS-certified smart display: a white-label Android display brand takes the board with GMS, Widevine L1 and a locked launcher for a retail estate rollout.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-C3588-A0 board carries that headroom without a board change.
• Smart mirror and hospitality: a hospitality supplier loads a mirror UI on the MIPI-DSI path with the 6 TOPS NPU running on-device voice wake.

For the Custom Android Motherboard and Smart Display category the practical signal in Ireland is that framework agreements are replacing spot buying, and the agreements are getting longer.

Read together, the three patterns explain the move in Cork from spot quotes to framework agreements released monthly, which is what a custom RK3588 motherboard programme needs to hold a twelve-month shipping window without a mid-year break.

Partner Success Story: Northlight Robotics in Cork, Ireland

Northlight Robotics, an AMR and AGV maker serving the Ireland market, deployed 7,800 custom WF-C3588-R5 robotics controller boards for a warehouse fleet rollout. The rollout covered the gms-certified smart display, smart mirror and hospitality, and smart home hub workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 7,800 custom WF-C3588-R5 robotics controller boards for a warehouse fleet rollout
• Region: Cork, Ireland
• Models used: WF-C3588-A0 (lead SKU), plus eight sibling custom RK3588 board variants in the same platform family
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, IEC 62368-1, EN 55032, EN 55035, plus optional UL 60950-1, GMS, Widevine L1 and Dolby Audio per variant
• Logistics: FOB Qingdao with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Dublin via the Dublin to Rotterdam relay

"We handed over our sensor list and got back a carrier with the LiDAR serial bank and the motor CAN routed exactly to spec. SLAM runs on the NPU on the same board that drives the wheels, which removed an entire controller from the chassis."

- Park Ji-hoon, Technical Director

Field Report: a machine-tool retrofit at a manufacturing plant outside Cork, where 28,925 units of the WF-C3588-A0 board were commissioned onto existing production lines

Reporter Yu Cheng, on the ground in Cork, Ireland. Commissioning engineers wired the WF-C3588-A0 boards into the existing fieldbus and ran a 96-hour production trial before sign-off. The boards held the cycle time on every line, and the plant's maintenance team kept two spares per line on the shelf rather than a full spare controller.

A carton-level audit matched 40 sampled serials against the burn-in database with no mismatch.

The inspection confirmed three things on the spot: the WF-C3588-A0 units hold the burn-in with a yield above 99.06 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering CE marking with ComReg radio interface notification administered by ComReg, cleared for entry at Port of Dublin on the Dublin to Rotterdam relay. Wanlin remains one of the few source factories currently shipping a nine-variant custom RK3588 motherboard line with a per-lot paper trail that Ireland importers can hand straight to their customs broker.

Filed by Yu Cheng, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-C3588-A0 Application Scenarios

The WF-C3588 line fits nine custom motherboard lanes, with the WF-C3588-A0 (Custom Android Motherboard for OEM and ODM Projects) as the lead SKU for Cork and Ireland programmes:

• GMS-certified smart display: a white-label Android display brand takes the board with GMS, Widevine L1 and a locked launcher for a retail estate rollout.
• Commercial tablet programme: an OEM builds an 8GB + 64GB tablet variant with a custom boot animation and pre-installed estate software.
• Smart mirror and hospitality: a hospitality supplier loads a mirror UI on the MIPI-DSI path with the 6 TOPS NPU running on-device voice wake.
• OTT and streaming terminal: a pay-TV operator takes the Android TV build with DRM credentials burned per lot at Longgang.
• Conference room panel: an office AV brand pairs the board with a touch layer and a custom launcher for meeting room displays.
• Smart home hub: an IoT brand runs the hub image with Matter support and Bluetooth 5.3 provisioning out of the box.
• In-vehicle display: a fleet contractor takes the wide-temperature variant with a custom Android build for passenger information screens.
• White-label kiosk terminal: a self-service brand ships the board under its own logo with a kiosk-mode ROM burned at the factory.

Partnership Models for Cork Buyers

Three commercial structures are open to Cork buyers on the WF-C3588-A0 and the rest of the WF-C3588 custom variants:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

The three tiers share one factory, one test flow and one certification file. For Cork buyers the standard entry point on the WF-C3588-A0 is the 8GB + 64GB (WF-C3588-A0-B) configuration at MOQ 5,000 units per shipment, 1-3 days to sample on standard variants and 15-30 days to mass production.

Frequently Asked Questions

What exactly can be customised on an RK3588 motherboard from AndroidSBC?

Answer: Practically the layers that decide whether the board fits your product: the PCB layout and outline, the memory and storage fit (4GB to 32GB LPDDR4X/LPDDR5, eMMC to 128GB plus NVMe or SATA), the display interface mix (HDMI 2.1, DP 1.4, LVDS/eDP/MIPI), the I/O bank (CAN, RS232/RS485 multi-serial, relays, digital I/O), the wireless stack, and the enclosure or DIN-rail chassis. On top of that sit the firmware options: custom Android ROM with a locked launcher, custom Linux or Yocto image, pre-installed applications, custom boot animation and OTA updates. A Ireland buyer can start from a standard WF-C3588 variant and change one layer, or bring a full schematic and have the carrier designed from scratch.

Can AndroidSBC port a custom Android ROM or a custom Linux BSP to our carrier board?

Answer: Yes. Under NDA, AndroidSBC delivers custom Android ROM work with proprietary services and a locked launcher, custom Linux images on Ubuntu, Debian, Yocto or Buildroot, BSP ports for customer carriers, and driver development for project-specific I/O. Source access is released to the partner, and the port is performed at Longgang, which matters because a vendor BSP rarely matches a custom carrier revision on the first try.

Can the 6 TOPS NPU on a custom board run our own AI models?

Answer: The NPU is fully open on the custom line. Bring the model in PyTorch, ONNX, TensorFlow or Caffe and the Longgang desk handles the RKNN quantization, the runtime integration and the validation against your board's thermal and memory profile. Custom AI algorithm integration is a standard line item on the ODM scope, and the resulting model ships embedded in the firmware image burned per lot.

What are the MOQ and lead times for a custom RK3588 motherboard?

Answer: Standard-variant samples ship in 1-3 days from stock, so your engineering team can start integration while the custom scope is being quoted. A custom run follows a 15-30 day mass-production window after schematic and stack-up sign-off. MOQ is 5,000 units per shipment on standard variants; on custom configurations the MOQ is negotiable against volume commitments, and small batch orders are accepted for pilot phases. A twelve-month framework agreement with monthly lot releases brings the per-lot MOQ down further.

What certifications does a custom board need for Ireland, and who handles them?

Answer: Yes, and the file travels with the goods. The pack covers CE, FCC Part 15, UKCA, RoHS 2.0, REACH and IEC 62368-1 with the EMC and safety reports for your configuration, dated within the prior year. AndroidSBC confirms any Ireland-specific addition at quotation stage, which is the point where the answer is still useful rather than expensive.

How long will AndroidSBC keep supplying a custom board?

Answer: The commitment is seven years minimum on supply, with security patches back-ported across the Android and Linux firmware tracks and OTA infrastructure for pushing firmware and RKNN model updates to deployed units. Long-lifecycle programmes in industrial, signage and robotics usually ask for the term in writing, and it is written.

Can AndroidSBC ship custom boards to Amazon FBA warehouses or 3PL consolidation points?

Answer: Yes, including DDP into Amazon FBA in the US, EU and Japan, plus 3PL consolidation points in Hong Kong, Singapore, Rotterdam, Los Angeles and Shenzhen. Cartons are labelled to FBA inbound spec and the declaration names Longgang as the origin. Partners who consolidate in Hong Kong usually take FOB Yantian and handle the last leg themselves.

How does AndroidSBC handle RMA or DOA replacements on custom boards?

Answer: AndroidSBC targets a 0.3 percent DOA rate across the WF-C3588 line, measured over the prior twelve months. On RMA, the partner returns the faulty WF-C3588-A0 unit to Longgang with its burn-in barcode, and a replacement ships within ten business days. Because the burn-in record and the configuration file are attached per unit, the failure analysis normally comes back with a root cause rather than a credit note, which matters when a custom configuration is holding up a production line.

Contact AndroidSBC: Start Your WF-C3588-A0 Sourcing Conversation

The AndroidSBC export desk handles all WF-C3588 enquiries from Cork and Ireland. Direct factory contact on the WF-C3588-A0 and the rest of the custom android motherboard for oem and odm projects line is available through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: CE marking with ComReg radio interface notification for Ireland, administered by ComReg, entering at Port of Dublin on the Dublin to Rotterdam relay
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

OEM and ODM enquiries move fastest when the first message carries the annual volume, the customization scope and the Incoterm. Send those three and the export desk replies with a per-lot quote and the full WF-C3588 MOQ matrix inside two business days.